HVAC Duct Cleaning

Jacksonville, Florida

Elevating the Norms of HVAC Coil and Duct Cleaning with Dry Fogging in Addition to Traditional Best Practices.

HVAC Duct Cleaning

Commercial Customers

We service commercial customers from our Orlando, Jacksonville, Daytona Beach locations
and 100+ partner locations nationwide.

Cleaning of HVAC Coils and Ducts.

Improve the air quality in your home or business by addressing the surfaces inside the branches and trunk line of your HVAC system, which can be challenging to reach. Our cost-effective services can enhance indoor air quality while also improving the energy efficiency of your blower and compressor in case of significant dust buildup.

Our comprehensive HVAC cleaning process includes the following six essential steps:

  1. Utilize high-pressure air to loosen dirt and debris from the AC and furnace coils before vacuuming them off.
  2. Run high-pressure air throughout the HVAC trunk lines and branches to break loose any remaining dirt, which is then vacuumed out of the system.
  3. Scrub and rinse return air vents, HVAC vents, and louvers.
  4. Brush off any remaining dirt on the HVAC coils and apply a special chemical to eliminate dust particles.
  5. Run a camera through the HVAC system so you can observe the work we have completed.
  6. Use our patented two-step process to dry fog the system, ensuring optimal air quality.

Dry Fog Patented Two-Step Process

We differentiate ourselves as the sole provider of Pure Maintenance’s patented dry fog process for residential and commercial HVAC cleaning in Seminole and Orange Counties. Our process offers faster and longer-lasting relief from a range of airborne contaminants that can cause sickness or weaken your immune system, including dust, dander, pollen, mold, bacteria, and viruses. This innovative solution is particularly beneficial for customers who suffer from allergies or frequent illnesses.

Mold can travel through the air and spread via your HVAC system, impacting the air quality throughout your property. While other remediation companies may only treat the directly affected area, our services include disinfecting your entire property with our patented dry fog process. This comprehensive approach involves treating every surface, including floors, walls, ceilings, countertops, and furnishings, with a hospital-grade sterilant and an antimicrobial coating.

According to a study by the Army Corps of Engineers, this two-step dry fog process provides effective protection against future mold growth and reduces the mold spore count in your air for at least 90 days after treatment. By choosing our services, you are investing in a solution that promotes optimal occupant health and safety.

For our residential customers, the cost of mold removal, remediation, and/or total restoration can vary depending on the scope of work, typically ranging from $.99 to $3.99 per square foot. For larger commercial, industrial, or government facilities, we offer volume discounts based on square footage.

Contact us to schedule a complimentary estimate and discover why we are the highest value option available.

References are available upon request.

Testing Air Quality

If you are experiencing health issues related to the quality of the air you breathe and would like to assess the effectiveness of our HVAC cleaning services, we offer air quality testing. Our tests can provide you with detailed information on the levels of mold, bacteria, mildew, dander, pollen, dust mite byproducts, and other contaminants in your air before and after our duct cleaning services.

Our air quality testing service is priced at $199 per test. We collect air samples and send them to certified third-party labs for analysis. Within three days, we receive a detailed report that we will review with you, outlining the type and level of harmful contaminants found in your air.

Eliminate Air Contaminants

image/svg+xmlVirusesBacteriaMoldsMildewsOdorsPollenDanderDust MitesDustTobacco

Fast Track Your Inspection

If So You Can Save $600 and
3 Days of Time!

We can be at your location within 24 hrs.

    protected by reCAPTCHA.Privacy - Terms

    Why Choose Pure Maintenance to Assess Your Mold Situation?

    With an unbeatable mold remediation process, Pure Maintenance has helped over 30,000 customers nationwide. We provide a solution that is faster and more cost-effective than traditional methods with our exclusive green and non-toxic dry fog protocol that starts with a hospital grade EPA verfieid sterilant and is followed by the application of an FDA approved antimicrobial. This protocol has saved individual residential & commercial customers thousands, and sometimes tens of thousands of dollars!

    Get your estimate today, and find out how getting the best can also deliver a savings. 

    Our revolutionary Dry Fog technology provides a powerful solution to mold remediation. Its particles are tiny enough that they permeate everywhere, penetrating even the tiniest of crevices unseen by the naked eye – eliminating any traces of black mold in their paths! No other method allows you this precision: vapors go exactly where liquid cannot reach and eradicate potential problems.

    To understand how effective our service is, consider an example of a 2000 sq ft home with 20 square feet of combined visible and hidden black mold.  Traditional mold removal methods would be confined to maybe a 100sqft area. Whereas we provide that same focused removal when necessary, plus treat your entire home, including all your belongings, mattresses, with a dry fog sterilant. Then we fog the entire premise a second time with an preventative coating, to keep mold away for 90-days or longer.

    We built this system to help our customers avoid any lingering health issues. No other solution compares.

    With Jacksonville Beach’s notorious humidity, mold spores and their mycotoxins that originate in a bathroom, kitchen, roof or elsewhere easily spreads throughout property. Every time. That is why we go above and beyond the traditional approach to home sanitation; not only do we target 2000 sq ft of floor area with our hospital-grade cold sterilant, but the ceiling walls, interior of your hvac, belongings and other surfaces for far more than  20,000+ sqft. Literally every surface in your entire home! Remeber 20 sq ft of mold, but 20,000 sq ft treated.  We could reasonably claim that we are a 1000X more effective than competing solutions.

    With Pure Maintenance Mold Remediation – Jacksonville Beach, get an ultra-deep clean feel and 90 days ‘round the clock protection that provides an ongoing cleaning effect .

    With a total home cleanse, your house will reach its highest level of cleanliness – better than when it was first constructed! This specialized service eliminates the risk of any spores taking hold and ensures that you enjoy improved air quality. Investing in this unique treatment is truly an investment into your health.  Nothing else quite like it on the market.

    Avoid major costs on your mold removal project with our exclusive and patented process.

    Not only can we help you dodge up to $600 in inspection fees, if they prove to be unnecessary, but we can also lessen the labor and material cost that would normally accompany demolition and the associated reconstruction!

    If those savings aren’t enough for you, we even provide access to public adjusters to engage your property insurance company with the goal of no out-of-pocket cost altogether.

    When searching for the right mold remediation professionals, make sure they are bonded and insured to cover up to one million dollars of damages. Additionally, check their Florida State certification and license status so you can be confident any assessment or project will meet the required Sunshine State standards.

    These are basic checks that all are entitled to, and it is worth ensuring you are not settling for anything less.

    The national average of cleaning up a home’s mold infestation is over seven days, but with us it’s done in no more than two days.

    For our residential customers that means less disruption to your life. For our commercial customers it means less downtime and impact to revenue.

    Experience peace of mind that comes with knowing your indoor air quality is clean and healthy. Our specialized dry fog mold remediation process guarantees outdoor-level air or better, no matter where in your home you take a test reading – we guarantee it!

    We use third party lab tests to compare outside and inside mold count per cubic meter before and after our remediation procedures. This way every customer can be assured their property is safe from lingering airborne contaminants.

    When only the best will do for you family’s health, you know who to call!

    pure maintenance mold inspector jacksonville fl specialist

    A Lower-Cost Way to
    Improve Occupant Health

    Investing in our HVAC cleaning services can have a significant impact on improving the air quality in your building. Prices range from a few hundred dollars for residential systems to a few thousand dollars for commercial systems, depending on the size. By doing so, you can reduce allergies, asthma, headaches, and other respiratory issues, as well as eliminating undesirable odors. Take a step towards a healthier environment for occupants with our comprehensive Total Building Cleaning services.

    Antimicrobial Dry Fog

    The Army Corps of Engineers tested our patented dry fog process and found it prevents future mold growth and continuously improves air quality for up to 90 days after treatment. Choose our innovative solution for long-lasting benefits to your property.

    Environmental Probiotics

    Our NG-5000 HVAC units are designed for commercial and healthcare applications, and are proven to reduce harmful bacteria, mold, viruses, dander, pollen, and dust mite fecal matter on a continuous basis. By incorporating good bacteria into your HVAC system, you can prevent poor air quality and ensure optimal indoor air quality 24/7/365.

    The Most 5-Star Reviews in Jacksonville

    Jacksonville Florida's Best HVAC Duct & Coil Cleaning

    We guarantee you will get the best possible results, while paying less per square foot than you would with any other provider in Florida.

    1. Pure Maintenance inspects your location
    2. We create a mold removal plan
    3. Then email an estimate ( which will contain a link to apply for Wisetack financing)
    4. Once the Wisetack application is complete and approved, Pure Maintenance can execute the mold removal plan

    Application takes 5 minutes and you see your options within seconds. No late fees, no prepayment fees, & no origination fees. Checking eligibility does not impact your credit score